analyzing-network-traffic-with-wireshark

The saved excerpt is a snapshot from review. The external source remains the complete and most current version.

---
name: analyzing-network-traffic-with-wireshark
description: 'Captures and analyzes network packet data using Wireshark and tshark
  to identify malicious traffic patterns, diagnose protocol issues, extract artifacts,
  and support incident response investigations on authorized network segments.

  '
domain: cybersecurity
subdomain: network-security
tags:
- network-security
- wireshark
- packet-analysis
- traffic-analysis
- pcap
version: '1.0'
author: mahipal
license: Apache-2.0
nist_csf:
- PR.IR-01
- DE.CM-01
- ID.AM-03
- PR.DS-02
mitre_attack:
- T1040
- T1071
- T1557
- T1046
---
# Analyzing Network Traffic with Wireshark

## When to Use

- Investigating suspected network intrusions by examining packet-level evidence of command-and-control traffic, data exfiltration, or lateral movement
- Diagnosing network performance issues such as retransmissions, fragmentation, or DNS resolution failures
- Analyzing malware communication patterns by capturing traffic from sandboxed or isolated hosts
- Validating firewall and IDS rules by confirming what traffic is actually traversing network segments
- Extracting files, credentials, or indicators of compromise from captured network sessions

**Do not use** to capture traffic on networks without authorization, to intercept private communications without legal authority, or as a substitute for full-featured SIEM platforms in production monitoring.

## Prerequisites

- Wireshark 4.0+ and tshark command-line utility installed
- Root/sudo privileges or membership in the `wireshark` group for live packet capture
- Network interface access (physical NIC, span port, or network tap) to the monitored segment
- Sufficient disk space for packet capture files (estimate 1 GB per minute on busy gigabit links)
- Familiarity with TCP/IP protocols, HTTP, DNS, TLS, and SMB at the packet level

## Workflow

### Step 1: Configure Capture Environment

Set up the capture interface and filters to target relevant traffic:

```bash
# List available interfaces
tshark -D

# Start capture on eth0 with a capture filter to limit scope
tshark -i eth0 -f "host 10.10.5.23 and (port 80 or port 443 or port 445)" -w /tmp/capture.pcapng

# Capture with ring buffer to manage disk usage (10 files, 100MB each)
tshark -i eth0 -b filesize:102400 -b files:10 -w /tmp/rolling_capture.pcapng

# Capture on multiple interfaces simultaneously
tshark -i eth0 -i eth1 -w /tmp/multi_interface.pcapng
```

For Wireshark GUI, set capture filter in the Capture Options dialog before starting.

### Step 2: Apply Display Filters for Targeted Analysis

```bash
# Filter HTTP traffic containing suspicious user agents
tshark -r capture.pcapng -Y "http.user_agent contains \"curl\" or http.user_agent contains \"Wget\""

# Find DNS queries to suspicious TLDs
tshark -r capture.pcapng -Y "dns.qry.name contains \".xyz\" or dns.qry.name contains \".top\" or dns.qry.name contains \".tk\""

# Identify TCP retransmissions indicating network issues
tshark -r capture.pcapng -Y "tcp.analysis.retransmission"

# Filter SMB traffic for lateral movement detection
tshark -r capture.pcapng -Y "smb2.cmd == 5 or smb2.cmd == 3" -T fields -e ip.src -e ip.dst -e smb2.filename

# Find cleartext credential transmission
tshark -r capture.pcapng -Y "ftp.request.command == \"PASS\" or http.authbasic"

# Detect beaconing patterns (regular interval connections)
tshark -r capture.pcapng -Y "ip.dst == 203.0.113.50" -T fields -e frame.time_relative -e ip.src -e tcp.dstport
```

### Step 3: Protocol-Specific Deep Analysis

```bash
# Follow a TCP stream to reconstruct a conversation
tshark -r capture.pcapng -q -z follow,tcp,ascii,0

# Analyze HTTP request/response pairs
tshark -r capture.pcapng -Y "http" -T fields -e frame.time -e ip.src -e ip.dst -e http.request.method -e http.request.uri -e http.response.code

# Extract DNS query/response statistics
tshark -r capture.pcapng -q -z dns,tree

# Analyze TLS handshakes for weak cipher suites
tshark -r capture.pcapng -Y "tls.handshake.typ